No-Phos - Phosphate Remover 1L
No pre-mixing needed, No-Phos can be added directly to the skimmer and is suitable for use with salt water generators.
No-Phos is a naturally formulated pool water additive that removes phosphates from pool water. The existence of phosphates in the water can encourage algae growth, as phosphates are nutrients for algae. No-Phos is not an algaecide or algaestat and does not kill algae. Normal sanitizer levels will kill algae and No-Phos helps with sanitizer efficiency. Regular use of No-Phos will help prevent the existence of all types of algae.
Directions:
1. Adjust pH to 7.2-7.6, and Alkalinity to 80-120ppm. Maintain sanitizer level between 1-5ppm.
2. Clean or backwash filter, if necessary.
3. Test water to determine phosphate level. It is recommended that you have your water tested by your local pool professional.
4. Determine required No-Phos dosage using the following chart:
Dose per 38,000L (10,000 gallons)
PHOSPHATE LEVEL (PPB) |
NO-PHOS |
300 or less |
250 ml or 8 oz |
600 |
500 ml or 16 oz |
900 |
750 ml or 24 oz |
5. With filter running, shack bottle well, and add required amount directly to skimmer. Note: if DE filter pressure rises above normal range, bump filter per manufacturer's instructions and restart. Repeat until pressure stays in normal range.
6. Run filter for a minimum of 8 hours/day for one week or 48 hours continuously without back washing or cleaning.
Size: 1L (0.26G)
We accept PayPal and Credit card (Visa or MasterCard). If you are ordering multiple units and part, please call us to see if we can save you shipping cost for multiple item orders.
No taxes to US residence!
Please allow 4-6 days for shipping via UPS Ground to USA or Canada. You will be emailed a tracking number to the email address you provide us. Expedited Shipping services are available!
Your #1 Hot Tub Parts Replacement Store!